A Comprehensive Guide to Ethernet Extenders
If you are looking to extend how far your internet can reach via Ethernet cable, below we have an in-depth explanation of why your cable will only reach so long and how you can extend that reach. Some methods are only reliable within the maximum abilities of a single Ethernet cable, 100 meters, while others will allow you to extend it for miles.
By learning how the internet is sent and received, you can begin to understand why there is a limit to how far a single Ethernet cable can be. With this information, we can also understand how we can extend that limit. Once you overcome that issue, you can take your Ethernet connections to incredible distances.
Sending Signals with Copper
With a little research, you will find that copper is the best conductor in its price range. Not only is it cheap, but it is also extremely malleable so turning it into a wire is a relatively simple process. While there are metals that are more malleable and more conductive, the price point of copper is key to its popularity. According to the Copper Development Association, copper is also able to transmit at a relatively low temperature. A metal that maintains a lower temperature can be used with less insulation, resulting in a cheaper product for the consumer.
With all that in mind, copper does have some limits. One of these limits is the length it can carry a signal. Ethernet cables, using copper to transmit, have an upper limit of 100 meters. While the average user will find 100 meters to be more than their needs, commercial users may find they need not only more length but a wider range than a single cable at 100 meters. With that in mind, Enable-It Ethernet Extenders and other ways of extending an Ethernet connection are listed below. Beneath the various ways to extend an Ethernet connection is a copper building block.
Five Methods for Extending an Ethernet Connection
There are many ways to go about extending an Ethernet connection. Below, we have gathered information on five of the most reliable methods and how they may be implemented. They range in reliability, length of the extension, and ability to generate more than one connection.
Today the world is largely connected via wireless internet. Many businesses use WAPs, or wireless access points, to create a larger number of connections and extend the limited abilities of a single Ethernet cable into multiple, far-reaching points. A WAP can also be used to tether multiple ethernet points along to increase length but can be less reliable for extension than other methods.
A more reliable connection within 200 meters can be made using network switches. Like the wireless connection, it can also be used by multiple parties to expand the capabilities of one Ethernet cable into multiple. It is commonly used for businesses and public spaces with multiple computers with internet access. By clicking here, you can access information on how to easily set up a network switch. This is one of the easier ways to connect multiple access points.
Say you need a far-reaching connection for security or video surveillance. One of the farthest-reaching connections available is with UTP Ethernet extenders. These extenders can be used to expand a network from 100 meters to upwards of 2.5 kilometers. Using this method, your signal is switched from ethernet to DSL and back. This option should be installed by knowledgeable people.
If your building was built in recent years, another viable option is coaxial extenders. Using the pre-existing coaxial cables built into a building’s infrastructure, you can extend your Ethernet connection up to 1000 meters. This option is much easier to set up than a UTP Ethernet extension but will require more than simply plugging two wires together.
The easiest and most basic method of extension is an inline coupler. This option is as simple as plugging two Ethernet cables into a connector. Unfortunately, it is only reliable within the 100-meter limit of a single Ethernet cable. If you have access to an inline coupler and two shorter cables, this is a viable option for making a connection within 100 meters with a very simple plug-and-play setup.
Extending your Ethernet Connection
There are many reliable methods of extending an Ethernet connection. Above, we have listed a few, though you can read more here: https://www.techreviewer.com/tech-answers/how-to-extend-your-ethernet-range/. The answer to your Ethernet problems can be as simple as plugging in an inline coupler to as complicated as setting up UTP Ethernet extenders. Your options range depending on how far you want to extend your Ethernet connection and how many access points you want to connect to.
If you are connecting multiple computers or other access points to a single network, the most reliable options are wireless connections and network switches. These options can also be used to extend an Ethernet connection, allowing users to access from a variety of locations at different lengths from the central Ethernet connection.
The ranges you can take your Ethernet connection can be stretched from the maximum of an Ethernet cable’s reliable connection of 100 meters to upwards of 2.5 kilometers. With this knowledge, you can choose the method that will fit your requirements. With just a few questions, you can find the best solution to your Ethernet extension questions and problems. With the power of copper and wireless transmitters, you are now able to connect within the range you require.